power chip shielded inductors PCS105 15 allied components interna tional 714-665-1 140 www.a lli edcom pon en ts .com rohs all specifications subject to change without notice. revised 04/06/09 dcr ( ) srf allied part number inductance ( h) tolerance (%) test freq. (mhz)typ max isat (a) dcr max. () idc (a) allied part number inductance ( h) tolerance (%) test freq. PCS105-r80t-rc PCS105-1r5t-rc PCS105-2r2t-rc PCS105-3r3t-rc PCS105-4r7t-rc PCS105-6r8t-rc PCS105-8r2t-rc PCS105-100t-rc PCS105-120t-rc PCS105-150t-rc PCS105-180t-rc PCS105-220t-rc PCS105-270t-rc PCS105-330t-rc PCS105-390t-rc PCS105-470t-rc PCS105-560t-rc 0.8 1.5 2.2 3.3 4.7 6.8 8.2 10 12 15 18 22 27 33 39 47 56 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 0.0043 0.0058 0.0072 0.0104 0.0123 0.0180 0.0200 0.0260 0.0330 0.0410 0.0460 0.0610 0.0690 0.0840 0.1060 0.1300 0.1490 13.50 10.50 9.25 7.80 6.40 5.40 4.85 4.45 4.00 3.60 3.20 2.95 2.70 2.50 2.30 2.00 1.90 PCS105-680t-rc PCS105-820t-rc PCS105-101t-rc PCS105-121t-rc PCS105-151t-rc PCS105-181t-rc 68 82 100 120 150 180 30 30 30 30 30 30 100 100 100 100 100 100 0.2010 0.2270 0.2530 0.3030 0.3700 0.4190 1.65 1.50 1.35 1.28 1.12 1.04 khz, 1v PCS105-221t-rc PCS105-271t-rc PCS105-331t-rc PCS105-391t-rc PCS105-471t-rc 220 270 330 390 470 30 30 30 30 30 100 100 100 100 100 0.5000 0.94 0.6720 0.84 0.8120 0.75 0.9530 0.70 1.290 0.60 PCS105-561t-rc 560 30 100 1.430 0.54 PCS105-681t-rc 680 30 100 1.600 0.52 PCS105-102t-rc 1000 30 100 1.990 0.48 PCS105-821t-rc 820 30 100 1.770 0.50 features ? shielded smd power inductor ? low dc resistance ? ideal for dc-dc converter applications electrical inductance range: 0.8h to 1000h tolerance: 30% over entire range operating temp: -40oc ~ +85oc idc: current at which inductance drop = test equipment (l): hp 4192a lf impedance analyzer pre-heat 150oc, 1 minute. physical packaging: 500 pieces per 13 inch reel. ? available in magnetically shielded resistance to soldering heat solder composition: sn/ag3.0/cu0.5 solder temp: 260oc 5oc for 10 sec. 1 sec. (rdc): chen hwa 502 (idc): hp4284a + hp42841a marking: eia inductance code 35% typ. dimensions: inches (mm)
|
